spinnaker halyard > IJCA Forums > International J/24 Class Association

Unanswered Active Topics

Forums Search

Subject: spinnaker halyard

You are not authorized to post a reply.

Author

Messages

Robert Reynolds
Posts:3

05/08/2008 5:40 PM
Removed halyards in the fall and replaced with messengers. Now spinnaker halyard will not feed back in. It seems to go over the visible sheave but hits something within a inch or two beyond that. The messenger when tied to itself will not let the knot pass either. Any thoughts before I take down the rig.

ferenc lazar
Posts:26

05/08/2008 6:27 PM
have you tried electrician's fishing tape?

Robert Reynolds
Posts:3

05/08/2008 9:11 PM
used rigging tape. are there 2 sheaves for the spinaker and 1 each for the jib?

ferenc lazar
Posts:26

05/11/2008 12:20 PM
Me thinks one for the spi halyard, one for the spi boom topping lift...

Pete Ramsdale
Posts:15

05/12/2008 10:56 PM
Yes the spin has 2 sheaves, the jib has 1. Make sure main halyard is eased in case it is interfering. Else your messenger line has jumped the aft sheave - go up the mast with a bit of wire to sort out.

Robert Reynolds
Posts:3

05/15/2008 2:44 PM
Nail on the head...... Messenger was off of the aft sheave and it took going up the mast to peek in and lift it back on the sheave. Thanks

You are not authorized to post a reply.